FAQ's
Can I leave the heat on when I am not using ultrasonics?
The heat option must be turned off after the cleaning cycle has ended.
How often should I replace the disinfecting solution?
It is recommended that the disinfecting solution be replaced daily.
I don’t see any residual ink left on the tubes; do I have to scrub them anyway?
If there is no visible ink left on the tube and you would like to double check, take a cotton
swab and wipe along the inner portion of the tube. If there is no ink on the cotton swab,
you're ready to proceed with the next step in sterilization.
Do I have to wear gloves when handling the tubes after they have been disinfected?
YES, it is for your safety and the safety of others that you wear gloves throughout the
cleaning process.
Can I dispose of the Ink-Out solution down my drain?
The Ink-Out solution has been deemed safe for the environment by L&R
Manufacturing, but always check with your state and local authorities for proper
disposal methods.

For any additional questions that you may have about our "Ink-Out" products
please refer to the "Contact Us" page. Our customer service team will be glad to
assist you.
For any additional questions about ultrasonics or other L&R products, please visit
our website by clicking the link below
.
L&R Ultrasonics Home Page


Tips:
1.  DO NOT over fill the basket with tubes. Two layers of tubes in the basket should be the
maximum. The size of the unit you are using will determine the number of tubes that will fit.
2.  Tubes should always be completely submerged in the solution for best results.